MY CART

Johnson Controls MQB Dashboard Calibration for Skoda - 5E0920861E / 5E0920861A

Johnson Controls MQB Dashboard Calibration for Skoda - 5E0920861E / 5E0920861A
  • Brand: Skoda
  • Product Code: BS-02
  • Weight: 0 g
  • Availability: In Stock

Tags: MQB, Dashboard, Calibration, Skoda, Johnson Controls, Instrument, Cluster, 5E0 920 861 E, &, Visteon, 5E0 920 861 A, BS-02

escriotion

The system allows to calibrate mileage and add keys to Skoda vehicles (Octavia) equipped with MQB Instrument cluster JCI 5E0 920 861 E & Visteon 5E0 920 861 A.

What are the requirements?

System requirements for dashboard calibration

  • Barracuda programmer
  • Barracuda adapter set JTAG
  • Activation SKODA MQB JCI 5E0 920 861 A/E
  • J2534 PassThru OBD Adapter
  • EEPROM programmer (Orange-5 or similar)
  • Vehicle must have at least one working key

System requirements for key addition

  • Barracuda programmer
  • Barracuda adapter set JTAG
  • Activation SKODA MQB JCI 5E0 920 861 A/E
  • J2534 PassThru OBD Adapter
  • EEPROM programmer (Orange-5 or similar)
  • Tango programmer
  • Vehicle must have at least one working key

Barracuda Adapter JTAG

Adapter set JTAG includes cable.

J2534 PassThru OBD Adapter

The software uses the Pass Thru adapter to communicate with the car's network.Our company neither manufactures nor sells the Pass Thru adapters. Pass Thru adapters are quite common and there are many different manufacturers worldwide. Usually there are no special differences between all these adapters.Each manufacturer supplies a driver for its adapter. The driver is suitable for adapters of this manufacturer. The drivers and adapters are not interchangeable along all manufacturers.
You should avoid assigning a driver of one manufacturer to an adapter of another manufacturer.Barracuda software allows user to assign any of installed drivers to his adapter, but this does not mean that the wrong assign will operate correctly.

  1. Install the driver as required and supplied by the adapter manufacturer.
  2. Make sure that Windows OS administrator privileges are given to Barracuda.exe.
  3. Launch Barracuda.exe (physically adapter is not needed).
  4. Select ECU Maker -> Skoda - > Instrument Cluster.
  5. Press PassThru Settings
  6. If PassThru drivers are correctly installed the following Window will appear
  7. In the example used multiple PassThru adapter drivers are installed on the system.
    Select the driver corresponding to the adapter you intend to use
  8. Once selected press OK. Barracuda software will continue use the selected driver.
    If you want to use a different adapter its driver have to be selected.

If no drivers are installed or are not compatible with the Windows OS you are using, the following error message will appear and selection menu will be empty (NONE)

Interface Overview



How to use?





Write a review

Note: HTML is not translated!
    Bad           Good
Desktop View
Subscribe to our newsletter and receive updates right in your inbox